How can I go and get surrounded by to POST on my computer, so that I can afterwards use the Acer disk-to-disk recovery??
Pease help!
Im desperate!
Answers:
For most computers it's any the F2, F10 or <Del> key. You own to press it as soon as you turn your computer on.
there should be a "acer" peak at boot up with two option rhea
press the f12 key to enter set up,after when you reach set up move about to "advanced bios features" then make over your boot order to cd rom/ide 1/floppy
the decree may differ in your p.c but the aim is to set the cd rom to boot first,so as long as the cd rom is the first boot device you can generate anything as the next two
after go stern to the main set up peak and press "save and exit set up" to let go the changes to cmos
later after this the p.c will restart and you should then consent to it fully boot,then once it have done this ,insert the acer recovery disk and restart the p.c
uopn restart the p.c will recognize a bootable media(acer disk) and will boot from that and start to recover your p.c
in the past you do this make sure you enjoy 1)your windows product knob 2)any device drivers from your p.c including chipset driver(important)
note:some acer p.c,s and laptops hold a option call "boot options",try this before you use set up
i hope this help
good luck rhea!
Normally you press delete when the computer is starting to procure to the post menu.
However, it may vary from computer to computer.
Some machines necessitate you to press F1 or another key.
Check out the website for your gadget.
Don't know off paw what Acer uses.
good luck
You can't run a disk from POST as such. I assume you are trying to metamorphose your boot order so that you can nouns a CD recovery disk. You should be capable of change the drive you boot from by pressing F8 soon after powering on your PC.
You can't thats not what the post is for it's just for memory testing when you turn your contrivance on.
I think you may stingy how to get into the BIOS settings.
As the other those who have answered here hold said pressing delete when the pc starts is ususally the answer.
You "MAY" see "press delete to entersetup" as the computer starts, and is usually previously the "beep"
It may also be F1, or any other key. Check out your documentation to find out which one it is.
One you are contained by the BIOS, you will want to go into "rough and ready settings" or Advanced settings and change your boot proclaim to>
1st device > CD/DVD ROM
2nd device > Hard Drive
every computer needs a persuaded key to press. "delete", "F1", "F2", "F8", "F10", "F12", "esc", "spacebar". atleast one of those should do it for you. that will capture you into the post.
Related Questions: